• Replies 11 replies
  • Subscribers 585 subscribers
  • Views 590 views
  • Users 0 members are here
Options
Related

Client Citect SCADA cannot connect to server

AO

Hi all

I tried to connect Citect SCADA Client to my Server.

The client hardware alaram shows "No IO Server Could Be found" same the thing for server Alarm and Report.

i find some document that say if you get "No IO Server Could Be found"  you should open ports (2082, 2083...) in the fire wall to connect client to the server. I tried to connect to IOServer Port 2082 Via Telnet but it dosent work.

When i usethis command on the server: Telnet 127.0.0.1 2082 its fine but when i change 127.0.0.1 by The server IP adresse 192.168.10.112 on the same machine its not working. i disabled the firewall but still not working. Then i made my local network private but still not working.

Can you plz help me

Thank you all

Parents
  • Hi Mr Patrick
    Thank you again

    the project configuration is very simple
    I have a USB key License with CITECT SCADA View Only CT103099 and I want to connect it to a server equipped with another USB key with License CT101113 1500 Pts Full server .

    Server IP adresse: 192.168.10.112
    Client View Only IP adresse: 192.168.10.113
    Both PCs are equiped with windows 10 and connected via a simple switch and configured "Networked"

    In the client side i made the changes in the Citect.ini
    [Client]ComputerRole=2
    [Client]ReadOnly=1
    [Client]FullLicense=0

    I specified in the client the adresse Network of the server: 192.168.10.112 for the IO Server, alarm server...
Reply
  • Hi Mr Patrick
    Thank you again

    the project configuration is very simple
    I have a USB key License with CITECT SCADA View Only CT103099 and I want to connect it to a server equipped with another USB key with License CT101113 1500 Pts Full server .

    Server IP adresse: 192.168.10.112
    Client View Only IP adresse: 192.168.10.113
    Both PCs are equiped with windows 10 and connected via a simple switch and configured "Networked"

    In the client side i made the changes in the Citect.ini
    [Client]ComputerRole=2
    [Client]ReadOnly=1
    [Client]FullLicense=0

    I specified in the client the adresse Network of the server: 192.168.10.112 for the IO Server, alarm server...
Children
No Data
© 2024 AVEVA Group Limited or its subsidiaries. All Rights Reserved.