• Replies 11 replies
  • Subscribers 585 subscribers
  • Views 585 views
  • Users 0 members are here
Options
Related

Client Citect SCADA cannot connect to server

AO

Hi all

I tried to connect Citect SCADA Client to my Server.

The client hardware alaram shows "No IO Server Could Be found" same the thing for server Alarm and Report.

i find some document that say if you get "No IO Server Could Be found"  you should open ports (2082, 2083...) in the fire wall to connect client to the server. I tried to connect to IOServer Port 2082 Via Telnet but it dosent work.

When i usethis command on the server: Telnet 127.0.0.1 2082 its fine but when i change 127.0.0.1 by The server IP adresse 192.168.10.112 on the same machine its not working. i disabled the firewall but still not working. Then i made my local network private but still not working.

Can you plz help me

Thank you all

Parents
  • Click Start / RUN / type in Configurator (Also available from Start Programs as selectable) Once here if you are running 2018R2 you may have the new security features on be default, so you will want to make sure you have set this up on Both the Sever and Client to ensure you have the same Trusted network and TLS1.2 encryption setup properly between the nodes. Make sure you don't have any configuration errors showing in this Configurator utility.
Reply
  • Click Start / RUN / type in Configurator (Also available from Start Programs as selectable) Once here if you are running 2018R2 you may have the new security features on be default, so you will want to make sure you have set this up on Both the Sever and Client to ensure you have the same Trusted network and TLS1.2 encryption setup properly between the nodes. Make sure you don't have any configuration errors showing in this Configurator utility.
Children
No Data
© 2024 AVEVA Group Limited or its subsidiaries. All Rights Reserved.