"Software Protection Failure. No key found or no license available from network"/System Services "Login aborted" in service mode

When I run Plant SCADA in service mode, it run fine if [Client]AutoLoginMode=0 . However I try to use autologinmode 1 or 2, System services fails to start, with the message "Login aborted". Eventualy the Runtime will give the error "Software Protection Failure. No key found or no license available from network" and close.

Parents
  • The service mode only supports the default setting of [Client]AutoLoginMode (= 0). All other settings of this parameter are designed for user interactive operations (non service mode). The problem you have seen is a known issue. An enhancement is requested to ignore this parameter setting when running in the service mode to avoid this issue.

Reply
  • The service mode only supports the default setting of [Client]AutoLoginMode (= 0). All other settings of this parameter are designed for user interactive operations (non service mode). The problem you have seen is a known issue. An enhancement is requested to ignore this parameter setting when running in the service mode to avoid this issue.

Children
No Data