BITAND function?

I'm surprised that the first example even works. In standard Variable Tags (that refer to physical I/O devices) expressions are not allowed in address fields, unless you are referring to Calculated Variables.

Can you give some more details about the tag definition and the Plant SCADA version used? It looks like your expression is limited to 8 bits.

I'm surprised that the first example even works. In standard Variable Tags (that refer to physical I/O devices) expressions are not allowed in address fields, unless you are referring to Calculated Variables.

Can you give some more details about the tag definition and the Plant SCADA version used? It looks like your expression is limited to 8 bits.

Hi Patrick

Yes from what i have found it seems the address field for the Cicode Digital tag is limited to 8 bits.

I am using Plant Scada 2023 Version 8.40.

I have a INT status Variable tag that gets data from physical I/O device. Each bit indicates if a timer is on/off.

I have internal Digital Variable tags ie Timer1, Timer2 ...Timer10 etc

In cicode if i write Timer1 = StatusTag BITAND (1), Timer2 = StatusTag BITAND (2)....Timer10 = StatusTag BITAND (512) etc and run this internal digital tags update as required.

If i change the Internal Digital Variable tag to cicode and add address as StatusTag BITAND (1) this works up to StatusTag BITAND (128). StatusTag BITAND (256) and above fails.

On graphics with a symbol set triggered from StatusTag BITAND (1) or StatusTag BITAND (256) or StatusTag BITAND (512) etc this also works.

Hope that makes sense.

Thanks

Sounds like a product limitation or defect. Maybe contact Support for further assistance?