Using Alarm Indicator on genie

Hi Mark ,

They are a little tricky to get going. I assume you have grouped a set of objects in Graphics Editor and enabled the Alarm Indicator feature?

See the help for more details: https://docs.aveva.com/bundle/plant-scada/page/1172183.html

Also note that the Alarm Indicator might not work if you have legacy graphics objects within the group.

From the help:

To configure an alarm indicator for an object group or Genie, you need to perform the following tasks:

1. Confirm that the required alarm priorities are assigned to an alarm category. See Categorize Alarms.

2. Define the display properties for the alarm priorities that an indicator will represent. See Configure Display Properties for an Alarm Priority.

3. For each object group or Genie, define the Alarm Indicator properties in Graphics Builder. See Alarm Indicator.

Let us know how you get on and if you require any further assistance.

Kind regards

Olivier

Hi Olivier, I got this working yesterday. I forgot to setup the alarm categories. I had the alarm priorities setup but I forgot to configure the alarm categories. 

thanks for the response.

Hi Olivier, I got this working yesterday. I forgot to setup the alarm categories. I had the alarm priorities setup but I forgot to configure the alarm categories. 

thanks for the response.